Volumio for Raspberry PI model B+

Discuss, contribute and orient Volumio development!

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.

Volumio for Raspberry PI model B+

Postby diskret » Sun Sep 28 2014 21:01

hi there -

just set up volumio 1.41 PI on B+ with hifiberry+

i followed the instructions in this thread (great help - thx!)
managed to mount my NAS via fstab entry - waited for the database update & was pretty amazed by what does work
can play mp3 and 16 bit flac without trouble - BUT:

as in other cases 24 bit 96 khz is not possible - in my case it actually freezes the system
i found the following entries which flooded my mpd.log:

: ffmpeg/flac: Could not find codec parameters (Audio: flac, 0 channels, s16)
: ffmpeg/flac: Estimating duration from bitrate, this may be inaccurate

so i searched a bit and disabled ffmpeg in mpd.conf - to no avail

24 bit is still not possible - as somebody above suggested it might be a raspi issue -
anyways i will keep following this thread to find out more since i would love to play some hires files ;)

thanks again michelangelo - really great project!
Random avatar
diskret
Sunday DIYer
Sunday DIYer
 
Posts: 14
Joined: Sun Sep 28 2014 20:51

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.


Volumio for Raspberry PI model B+

Postby diskret » Sun Sep 28 2014 22:08

i just found the following errors after dmesg:

pcm512x 1-004d: No SCLK, using BCLK: -2
pcm512x 1-004d: Completed initialisation - pcm512x_probe
pcm512x 1-004c: Failed to reset device: -5
pcm512x: probe of 1-004c failed with error -5

could there be a connection with the missing 24 bit playback?

best
Random avatar
diskret
Sunday DIYer
Sunday DIYer
 
Posts: 14
Joined: Sun Sep 28 2014 20:51


Volumio for Raspberry PI model B+

Postby arginine » Wed Oct 01 2014 19:05

Hello,

Since I have less that 10k of music files ---> how to "re-enable" the library tab on volume 1.41 (RPI-B+) ?
Thanks

F
Random avatar
arginine
Sunday DIYer
Sunday DIYer
 
Posts: 49
Joined: Tue Mar 25 2014 18:33


Volumio for Raspberry PI model B+

Postby joda2 » Wed Oct 01 2014 21:28

arginine wrote:Since I have less that 10k of music files ---> how to "re-enable" the library tab on volume 1.41 (RPI-B+) ?


Go to the WebUI, click on the top right button "menu", then go to system tab
under the upnp and airplay switches you will find the library tab switch.

Dont forget to press the apply button
Volumio 1.5 supports Spotify 8-)

Changelog: http://goo.gl/rkjrqe

if you found a grammatical error you can keep it for yourselve
User avatar
joda2
Moderator
 
Posts: 290
Joined: Mon May 12 2014 21:17
Location: Germany


Volumio for Raspberry PI model B+

Postby arginine » Thu Oct 02 2014 19:12

joda2 wrote:
arginine wrote:Since I have less that 10k of music files ---> how to "re-enable" the library tab on volume 1.41 (RPI-B+) ?


Go to the WebUI, click on the top right button "menu", then go to system tab
under the upnp and airplay switches you will find the library tab switch.

Dont forget to press the apply button


under system tab (in services management section) I got airplay, upnp control and upnp/dlna indexing ... but not the library tab switch ??? (or I'm blind ?)
I'm using volume 1.41 on a RPI-B+
Random avatar
arginine
Sunday DIYer
Sunday DIYer
 
Posts: 49
Joined: Tue Mar 25 2014 18:33


Volumio for Raspberry PI model B+

Postby joda2 » Thu Oct 02 2014 22:03

so i can see it
Are you sure that you use Volumio 1.41? (from this link: http://sourceforge.net/projects/volumio/files/Raspberry%20PI/1.4/Volumio1.41PI.zip/download)
Attachments
library_panel.png
library_panel.png (59.84 KiB) Viewed 1884 times
Volumio 1.5 supports Spotify 8-)

Changelog: http://goo.gl/rkjrqe

if you found a grammatical error you can keep it for yourselve
User avatar
joda2
Moderator
 
Posts: 290
Joined: Mon May 12 2014 21:17
Location: Germany


Volumio for Raspberry PI model B+

Postby Taizen » Fri Oct 03 2014 22:23

Hi Joda2,

I will wait mid october, for the new release :)

Thanks a lot.

Kind regards
User avatar
Taizen
Fresh off the boat
Fresh off the boat
 
Posts: 5
Joined: Fri Apr 18 2014 18:38


Volumio for Raspberry PI model B+

Postby hooliganshark » Fri Oct 10 2014 00:04

Just to add my thanks to all on here for the software and for the help.

Managed to get Volumio 1.4 working on Pi+ and iqaudio Pi-Dac+. Still in shock - wonderful. At the moment still playing around but looking forward to having more fun....:)

Thank you.
Random avatar
hooliganshark
Fresh off the boat
Fresh off the boat
 
Posts: 5
Joined: Fri Sep 19 2014 21:38


Volumio for Raspberry PI model B+

Postby arginine » Mon Oct 13 2014 18:38

joda2 wrote:so i can see it
Are you sure that you use Volumio 1.41? (from this link: http://sourceforge.net/projects/volumio/files/Raspberry%20PI/1.4/Volumio1.41PI.zip/download)


I've re-dowloaded volumio 1.41 from your link, re flash and still no library panel ???

the volumio 1.41 image I've downloaded is 1.89 Gb in size and dated from 5 august 2014 (18h10)
ps: while login to shh i still have "volumio 1.4" under the volume logo (is that normal ?)

anybody would have a suggestion ?
Random avatar
arginine
Sunday DIYer
Sunday DIYer
 
Posts: 49
Joined: Tue Mar 25 2014 18:33


Volumio for Raspberry PI model B+

Postby joda2 » Mon Oct 13 2014 22:08

arginine wrote:I've re-dowloaded volumio 1.41 from your link, re flash and still no library panel ???


:| ok my mistake ... 1.41 has no library tab ... you need to update the system.

if you wanna do this you can follow this little guide: (which can also be found here: http://volumio.org/forum/enabling-disabling-the-library-t1712-20.html)

Guide (starting with a brand new installed volumio) for people like me (Noobs^^)

with help of these guides:

1. Installing git
sudo apt-get update
sudo apt-get install git
mv /var/www /var/www-orig
mkdir /var/www

2.1 Creating a SSH Key (if you have one move to 3.)
ls -al ~/.ssh
if you see something like id_rsa.pub or id_dsa.pub go to 2.3
2.2
ssh-keygen -t rsa -C "your_email@here.com"
enter a passphrase
ssh-agent -s
ssh-add ~/.ssh/id_rsa (if this goes wrong: ssh-agent -s)
2.3
go to https://github.com/settings/admin
click SSH Keys on the left side
add a key
Name: Volumio
Key: all text in ~/.ssh/id_rsa.pub (open with: nano ~/.ssh/id_rsa.pub)

3. Getting the New UI
git clone git@github.com:jotak/Volumio-UI.git /var/www
cd /var/www
git checkout -b act_library

4. "Installing" it
cd /var/www/updates (if this goes wrong do: git reset --hard origin/act_library)
./update.py

Restart Volumio, clear the browser cache and try the Library ;)

At your own risk


arginine wrote:ps: while login to shh i still have "volumio 1.4" under the volume logo (is that normal ?)


yes, i think michelangelo forgot to change that ;)
Volumio 1.5 supports Spotify 8-)

Changelog: http://goo.gl/rkjrqe

if you found a grammatical error you can keep it for yourselve
User avatar
joda2
Moderator
 
Posts: 290
Joined: Mon May 12 2014 21:17
Location: Germany

PreviousNext

Return to Development talks

Who is online

Users browsing this forum: No registered users and 2 guests