Volumio for Raspberry PI model B+

Discuss, contribute and orient Volumio development!

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.

Volumio for Raspberry PI model B+

Postby oaksboard » Sun Sep 14 2014 20:34

so here i am again.

as i had suspected the issue is not related to volumio nor to the hifiberry addon boards.

the same problem exists on a stock raspberry pi b+ with raspbian installed. atm updating everything does not solve the problem.
it does not appear with onboard audio because selecting plug or hdmi output in mpd, audio is resampled from 96khz to 48k.

it happens with both a hifiberry digi+ and an external usb dac (capable of 192khz/24bit). the same usb dac works flawlessly on a raspberry pi b model and raspbian.

i think i'm going to post this on some official raspberry pi forum.

bye,
oskar
Random avatar
oaksboard
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Thu Sep 04 2014 19:32

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.


Volumio for Raspberry PI model B+

Postby oaksboard » Mon Sep 15 2014 11:12

Random avatar
oaksboard
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Thu Sep 04 2014 19:32


Volumio for Raspberry PI model B+

Postby haoc0114 » Tue Sep 16 2014 13:40

Hi,

I have problem using Volumio 1.41 PI on B+.
There is a error when start up, the message is

[....] startpar: service(s) return failure: transisntlog ...cat:/run/player_wrk.pid: No such file or directory
failed

The screen will stop at

[ 136.957078] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 136.972684] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 222.491079] bcm2835-cpufreq: switching to governor performance
[ 222.504503] bcm2835-cpufreq: switching to governor performance

Can anyone teach me how to solve this, please.
Random avatar
haoc0114
Fresh off the boat
Fresh off the boat
 
Posts: 4
Joined: Mon Sep 15 2014 00:42


Volumio for Raspberry PI model B+

Postby michelangelo » Tue Sep 16 2014 13:47

This is not a problem, don't worry but please stay on topic
User avatar
michelangelo
Founder
 
Posts: 4179
Joined: Sun Dec 15 2013 23:18


Volumio for Raspberry PI model B+

Postby haoc0114 » Tue Sep 16 2014 13:58

OK, thank you!!
Random avatar
haoc0114
Fresh off the boat
Fresh off the boat
 
Posts: 4
Joined: Mon Sep 15 2014 00:42


Volumio for Raspberry PI model B+

Postby sonder » Tue Sep 16 2014 15:30

Im all new to linux and I've followed the guide with my model b+ and digi+ but i simply cant make it work. The digi+ doesn't show up in volumio.

I've tried a test img from hifiberry, so the devices are working.

Cant someone please upload a volumio .img where the digi+ is enabled?
Random avatar
sonder
Fresh off the boat
Fresh off the boat
 
Posts: 2
Joined: Mon Sep 08 2014 16:03


Volumio for Raspberry PI model B+

Postby oaksboard » Tue Sep 16 2014 18:41

hello sonder,

you will not be able to enable it from the web interface of volumio (because of the "worker thread busy" issue), but follow this guide, and it should work: http://www.hifiberry.com/guides/hifiberry-software-configuration/

follow this order:
- edit blacklist and modules files
- reboot
- the "configure alsa" step should not be necessary
- test with "aplay -l"
- configure output in volumio.local

bye,
oskar
Random avatar
oaksboard
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Thu Sep 04 2014 19:32


Volumio for Raspberry PI model B+

Postby hooliganshark » Sun Sep 21 2014 00:28

Hello, I posed this question in the help section but I will ask here also as it relates to a Pi+ and version 1.41.

Is the upnp renderer software included with this version please? If not is it planned to be added?

I have just got a pi+ which I would love to use with volumio, controlled by bubbleupnp, with flac files from minidlna on my nas.

Thanks in advance.
Random avatar
hooliganshark
Fresh off the boat
Fresh off the boat
 
Posts: 5
Joined: Fri Sep 19 2014 21:38


Volumio for Raspberry PI model B+ and DAC+

Postby Taizen » Thu Sep 25 2014 22:08

Hello guys,
When do you think the next release will be available "out of the box" to enjoy the sound of DAC+ with PI B+ ?

I have already try the workarounds describe before, but with no success.

Thanks in advance for your great work.

Kind regards.
User avatar
Taizen
Fresh off the boat
Fresh off the boat
 
Posts: 5
Joined: Fri Apr 18 2014 18:38


Volumio for Raspberry PI model B+

Postby joda2 » Thu Sep 25 2014 22:33

hooliganshark wrote:Is the upnp renderer software included with this version please? If not is it planned to be added?


yes its included

Taizen wrote:When do you think the next release will be available "out of the box" to enjoy the sound of DAC+ with PI B+ ?


Should be included in the next version.
Can´t say it exactly ... should be in mid october
Volumio 1.5 supports Spotify 8-)

Changelog: http://goo.gl/rkjrqe

if you found a grammatical error you can keep it for yourselve
User avatar
joda2
Moderator
 
Posts: 290
Joined: Mon May 12 2014 21:17
Location: Germany

PreviousNext

Return to Development talks

Who is online

Users browsing this forum: No registered users and 1 guest
cron