Page 4 of 5

Volumio 2 Plugins Collection

PostPosted: Sun Mar 04 2018 00:04
by gvolt
RemotePi plugin

Volumio 2 plugin enabling support for the RemotePi board for Raspberry Pi 3, Pi 2, B+ and B from MSL Digital Solutions.

Shutdown and cutting power
After activating the plugin the RemotePi board will get signaled as soon as Volumio is shut down via the GUI.
This allows the RemotePi board to cut power from the RasPi after the shutdown process has finished.

Further more the plugin detects the signal that is sent by the RemotePi board in case its hardware knob has been pressed or an IR power off signal from a remote control has been received. The plugin then initiates the shutdown of Volumio and sends a signal back to the RemotePi. This allows the board to detect when Volumio's shutdown process has finished and cut the power afterwards.

Set up IR receiver for LIRC
The plugin configures Volumio to load the necessary lirc-rpi overlay for the IR receiver of the RemotePi board. By default the gpio_in_pin parameter is set to 18. But as RemotePi boards can be modified to use GPIO17 for the IR receiver instead of GPIO18 the plugin allows to set up the configuration accordingly.

Note: The plugin will not install and setup LIRC! This can be achieved by installing the IR remote controller plugin. Pay attention to get version 1.2.0 of the IR remote controller plugin. Earlier versions will override the gpio_in_pin setting with GPIO25.

Platform: Raspberry Pi

Source: https://github.com/gvolt/volumio-remotepi-plugin

Author: gvolt

Status: stable

Tested on: RPi3, RemotePi, Volumio 2.362 - 2.389, 2.413 - 2.526

Volumio 2 Plugins Collection

PostPosted: Mon Mar 19 2018 20:45
by Saiyato
pydPiper plugin

Volumio 2 pydPiper plugin

Platform: Raspberry Pi (but possibly multiple board platforms)

Source : https://github.com/Saiyato/volumio-pydpiper-plugin
File to download : volumio-pydpiper-plugin.zip

Info:
The custom pages are only working for the RaspDac OLED

Author: Saiyato

Status: Beta

Update 23-05-2018: uploaded a new version, I2C HD44780 does not have a nice template yet for 24h formats, the rest seems to be working (some fine tuning of the templates is advised).

Volumio 2 Plugins Collection

PostPosted: Mon Mar 19 2018 20:48
by Saiyato
Audiophonics on/off plugin

Volumio 2 Audiophonics on/off plugin

Platform: Raspberry Pi (but possibly multiple board platforms)

Source : https://github.com/Saiyato/volumio-audi ... off-plugin
File to download : volumio-audiophonicsonoff-plugin.zip

Info:
A plugin to control just the on/off button in the Audiophonics case, best way to use it is through a Sabre V2/V3/V4; this DAC has an onboard script to have the button blink upon booting/shutting down.

Author: Saiyato

Status: stable

Volumio 2 Plugins Collection

PostPosted: Sun Mar 25 2018 14:40
by cgsong
Podcast plugin for Volumio.

User can play podcast item in Volumio with this plugin. Also, user can add or delete podcast RSS feed url at setup configuration in this podcast plugin.

* Predefined Podcast
  • BBC radio podcasts (radio 1, 2, 3, 4, 4extra, 5live, 5live sports extra, 6music, world service)
    (Note: some of BBC podcast episodes that includes "[UK Only]" at podcast title are played only UK region)
* Add podcast
* Delete podcast
  • at podcast plugin setup configuration, select podcast item from podcasts list then click delete button.

Platform: all platform includes Raspberry Pi and x86 (no platform specific codes)
​Source : https://github.com/ChrisPanda/volumio-podcast-plugin
File to download : https://github.com/ChrisPanda/volumio-podcast-plugin/releases/download/0.1.0/volumio-podcast-plugin-0.1.0.zip

Author: Chris Song (chrispanda)

Status: stable

Volumio 2 Plugins Collection

PostPosted: Wed Mar 28 2018 07:00
by gvolt
miniDLNA plugin

Volumio 2 plugin for installing and configuring a miniDLNA (aka ReadyMedia) server.

Configuration
The plugin gives access to all configuration options (except "user to run as" which is set to "volumio") the minidlna.conf file contains. Currently the options of miniDLNA version 1.1.2 are supported.

Force rescan
The plugin features a rescan button that allows to force a rescan of all media directories for new media files.

Platform: Raspberry Pi, x86 (probably also works on other platforms as long as the minidlna package is available)

Source: https://github.com/gvolt/volumio-minidlna-plugin

Author: gvolt

Status: stable

Tested on: RPi 3B (Volumio 2.389, 2.413, 2.452 - 2.526), x86 (Volumio 2.387, 2.411 - 2.526 in a VM)

Volumio 2 Plugins Collection

PostPosted: Sat Apr 28 2018 08:13
by thomas.doerr
Autostart

Replacement for former Plugin 'Autoplay'. I reimplemented it with another lib underneath, since many people reported issues.

Starts playing the last entry in the queue after rebooting volumio.
This is a "must have" for webradios without a modern frontend (http://pin.it/uVFOjQ6).

You just need to install and enable the plugin.

Platform: Raspberry; tested on 3 with HifiBerry

Source: https://github.com/volumio/volumio-plug ... /autostart

Author: Thomas Doerr

Status: stable works since months on my machines, if you have any problems, please contact me.

FM transmitter configuration plugin

PostPosted: Sun Apr 29 2018 20:22
by Randy
Title: fmxmtr

Description: Set up and control I2C FM transmitter module by Electhouse based on KT-0803K fm transmitter chip. Should work on any I2C module utilizing the KT-0803 series IC.

How to obtain the plugin: https://github.com/CannonFodderSE/volumio-plugins/tree/gh-pages/plugins/miscellanea/fmxmtr

Author: Randy Bancroft

Contact: randybancroft@verizon.net or user name Randy on Volumio Forums

Plugin status: stable on RPi3'

See initial message announcing release at https://volumio.org/forum/turn-your-volumio-into-radio-station-t9810.html

Volumio 2 Plugins Collection

PostPosted: Wed May 16 2018 04:28
by cgsong
ES9018K2M control plugin for Volumio

This plugin control es9018k2m chip by i2c so user must connect i2c pins between raspberry pi and es9018k2m DAC.

* supported platform: Raspberry Pi
* supported es9018k2m hardware

  • Aoide es9018k2m DAC II (tested)
  • General es9018k2m DAC/DDC that contains i2c pins
* supported functions
  • volume, mute control
  • adjust balance and switch left/right channel
  • digital filter(fast/slow rolloff, IIR) and de-emphasis filter
  • i2s/DSD DPLL(Digital Phase Locked Loop) Jitter Reduction

Platform: Raspberry Pi
​Source : https://github.com/ChrisPanda/volumio-es9018k2m-plugin
File to download (less than Volumio version 2.411)

File to download (more than Volumio version 2.411)


Author: Chris Song (chrispanda)

Status: stable

Volumio 2 Plugins Collection

PostPosted: Wed May 23 2018 12:52
by orderoftheflame
Onkyo Controller

A simple plugin that is able to turn an Onkyo receiver on the network on and off when playback begins and ends using eISCP.

Features:
  • Automatically or manually detect compatible Onkyo receivers on the network .
  • Send a power on or power off command to an Onkyo receiver when Volumio playback begins or ends.
  • Set the volume on the receiver to a set value when Volumio playback begins.
  • Set the receiver channel on playback beginning.
  • Delay the power off command to the receiver (to allow for pausing music without shutting down).

Platform: Raspberry Pi; tested on 2 and Zero W. It should be platform agnostic though.

Tested with an Onkyo CR-N755 receiver, but should be fine with any receiver that can use the Onkyo remote app.

Installable through volumio plugins menu, or see Github for manual installation.

Author: Orderoftheflame

Status: stable

Github project : https://github.com/orderoftheflame/volu ... yo_control
Discussion thread: onkyo-controller-t10013.html

Volumio 2 Plugins Collection

PostPosted: Sun Jun 24 2018 13:43
by marco79cgn
Radio Paradise Plugin

The Radio Paradise plugin allows to play their streams - including the FLAC version - within volumio. http://www.radioparadise.com is a commercial-free listener-sponsored Internet radio station that identifies itself as an "eclectic online rock radio" station. It plays different styles of pop and rock music, but occasionally other genres from jazz to classical to electronic music and world music.

Features:
  • listening to normal streams in different quality (mp3 and aac)
  • listening to the flac version
  • metadata for flac (cover, artist, title)
  • pause/resume
Platform:
Raspberry Pi; tested on 3 and Zero W. It should be platform agnostic though.

Installable through volumio plugins menu, or see Github for manual installation.

Author: marco79cgn

Status: stable

Github project : https://github.com/marco79cgn/volumio-plugins/tree/master/plugins/music_service/radio_paradise
Discussion thread: https://volumio.org/forum/radio-paradise-t9886.html