Page 1 of 1

can't connect to SMB/cifs network share

PostPosted: Sat Mar 17 2018 14:57
by hoosfoos
Hello, trying to get up and running with volumio, but I can't connect to my network share.
My NAS is Synology DS1515+
I am using SMB file sharing.
I have no problem connecting to my network share using my Windows 10 computer, my Arch Linux laptop, or using runeaudio on my Raspberry Pi 3B (not the brand new 3B+, but the older RPi 3B). So I don't think it's any permission issue on the NAS. Now trying to switch from runeaudio to volumio, using the same Raspberry Pi 3B

Here are the settings I'm using:
Image

I tried searching these forums, and all the solutions that I've found suggest to use NFS instead of cifs. But I'd prefer to just continue using cifs. Is this a known issue with volumio? Am I doing something wrong?

Thanks in advance for any help.

can't connect to SMB/cifs network share

PostPosted: Sat Mar 17 2018 15:03
by ashthespy
What version of ciffs protocol are you on?
Add `vers=2.0` or `vers=1.0` into the options field and check if that works for you!

PS:
bug-network-share-t8167.html#p42290
https://github.com/volumio/Volumio2/issues/1517
https://github.com/volumio/Volumio2/issues/1422


;-)

can't connect to SMB/cifs network share

PostPosted: Sat Mar 17 2018 15:09
by hoosfoos
I hadn't checked my version of cifs, whatever the default was for Synology.

This is what my NAS shows
Image

I guess that means that I'm running both SMB1 and SMB2?

In any case, I added "vers=2.0" to the options, and it worked.

Thank you very much for the quick help! Much appreciated!

can't connect to SMB/cifs network share

PostPosted: Sat Mar 17 2018 15:27
by ashthespy
Was in a similar situation a few weeks back, but a little irked cause my working setup didn't work anymore.
After some troubleshooting, and poking around the files from ssh, I found the easy GUI solution in the github issue.

Anyway, glad to help!

can't connect to SMB/cifs network share

PostPosted: Fri Dec 07 2018 19:15
by sparky
I converted my NAS share from NFS to SMB and for that use the CIFS file share type setting in Volumio.
Adding vers=2.0 was the thing that did the trick for me too. Thanks!