Hello
Is this function already working?
“screenDelay = 30 # number of minutes before turning off the screen”
For me, the screen is always on and does not go out after 30 minutes.
Thank you
Hi yes it is working fine for me, which screen are you using?
Official LCD 7 Rapsberry Pi. The function works, but then when the music stops playing. I thought that this function also turns the LCD off when playing music.
No, as it is at the moment, the screen will stay on while it is playing and then when music stops/pauses then it will wait before turning the screen off. I thought it would be best to keep the screen on when playing as it is the only way to interact with the player for me 
Hi,
I just started with the offical RasPi screen.
I started with the easy way. Just install the plugin an see how it is.
It was quite nice.
Now I did some things from this thread - many thanks for this.
As you say the screen now does not turn of while playback - I do not like this. Before the fiddling around (only the touch plugin installed) it was turning off during playback as well. I liked this. How do I get this back?
Thanks.
I do not know if it works in this post (due to adaptation screen software) screen blank on off and timeout.
Just edit with following commands on the commandline
cd…
cd…
cd opt
sudo nano volumiokiosk.sh
Originaly it looks like this:
#!/bin/bash
xset -dpms
xset s off
openbox-session &
while true; do
/usr/bin/chromium-browser --disable-session-crashed-bubble --disable-infobars --kiosk --no-first-run ‘http://localhost:3000’
done
edit the lines:
“xset -dpms” to “xset +dmps”
and
“xset s off” to “xset s blank”
and add the line
“xset dpms 0 0 120”
it should look like this:
#!/bin/bash
xset +dpms
xset s blank
xset dpms 0 0 120
openbox-session &
while true; do
/usr/bin/chromium-browser --disable-session-crashed-bubble --disable-infobars --kiosk --no-first-run ‘http://localhost:3000’
done
link to change tutorial screen timeout:
Hi guys, I’m the new one in raspberry pi community and volumio I absolutely love volumio, for beautiful interface and easy configuration. I have raspberry with original 7’’ touchscreen and latest version of volumio, I’ve done this tutorial step by step, everything seems to work except screen backlight timeout, no matter what time (minutes) I set, screen turning off after few minutes, I want to keep my display on when I’m using volumio. Can you please help me?
As michel8166 says, just don’t do (or undo if you have done it) the section “Stop screen blanking and crashed message” That will enable the systems screen blanking.
I am away on work at the moment but looking at the script the line:
if (time.time() - pausedTime > screenDelay and status["status"] <> "play" and blState <> 0): # check if paused for longer than "screenDelay" seconds, volumio is not playing and backlight is on
stateChange = "blOff" # turn off backlight
you can remove the “and status[“status”] <> 0” and that will let it turn the screen off even when playing. That said more of the script would need altering in order to update the “pauseTime” variable to let that work, probably needs updating when play is pressed as well as when pause happens.
I would say is the system blanking is still working. First I would say check the section “Stop screen blanking and crashed message” which turns that off. Make sure there are no typo’s etc
Thank you guys for your replies and tips, I’ve checked once again everything in section “Stop screen blanking and crashed message”, and yeah it was my mistake, I didn’t change one line from xset s blank to xset s off, now everything is working like a charm BTW, very good tutorial
Fun thing with coding, when your sure everything is right but it doesn’t work. Then you spend HOURS tracing it down only to find out in some iff statement you used a < instead of a > LOL
Glad you have it working now 
Great tutorial, all (almost) worked for me as well.
Can you advise how you manage to get rid of scroll bar on main Volumio screen? I’m using official Raspberry Pi 7" touch screen and there’s no additional content on the main screen so the scroll bar isn’t needed.
Glad it worked out okay Regarding the scroll bar the only way I know is to edit the Volumio config files, and that screws up automagic updating. However in the guide there is this part “Move track and volume controls up (stops them clipping on the bottom of the screen)” and at the end of that section it shows how to enlarge the touch bar. You should be able to remove it by making it super small.
Hello, it’s me again
I have one problem with tutorial.
I’m using volumio since version 2.555, now I have latest 2.572, and since 2.555 I have a problem with section Move track and volume controls up (stops them clipping on the bottom of the screen). I’m opening file app-013f2d5c5e.css but it’s empty, I’m trying to search for volumeManager{margin-top, but no result. Can you help me? I cannot move controls and I cannot change scrollbar width. Everything else from tutorial working well
Hi,
Just updated to 2.572 and checked, it is still in my CSS file 
Try searching for just “volumeManager”. There are 7 matches in my CSS file which should give you an idea of what is going on
Hello
Is it possible to rewrite the script so that you can dim or lighten the LCD screen from the remote control?
Excellent…thank you very much for this guide!
Since I’ve upgraded to the latest Volumio version unfortunately matchbox-keyboard is no longer starting. Even if i start it from command line it is terminating without any error message or log entries. Any idea?
Thanks, Martin
matchbox-keyboard 0.1
root@pi:~# matchbox-keyboard
root@pi:~# ps ax|grep matchbox
1185 ? S 0:00 matchbox-window-manager -use_titlebar no
9853 pts/0 S+ 0:00 grep matchbox
root@pi:~# matchbox-keyboard -d
root@pi:~# ps ax|grep matchbox
1185 ? S 0:00 matchbox-window-manager -use_titlebar no
9905 pts/0 S+ 0:00 grep matchbox
root@pi:~# ldd /usr/bin/matchbox-keyboard
linux-vdso.so.1 (0x7efb8000)
libX11.so.6 => /usr/lib/arm-linux-gnueabihf/libX11.so.6 (0x76e85000)
libfakekey.so.0 => /usr/lib/arm-linux-gnueabihf/libfakekey.so.0 (0x76fd8000)
libXft.so.2 => /usr/lib/arm-linux-gnueabihf/libXft.so.2 (0x76e6c000)
libexpat.so.1 => /lib/arm-linux-gnueabihf/libexpat.so.1 (0x76e3a000)
libpng12.so.0 => /lib/arm-linux-gnueabihf/libpng12.so.0 (0x76e0a000)
libXrender.so.1 => /usr/lib/arm-linux-gnueabihf/libXrender.so.1 (0x76df9000)
libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0x76cb8000)
/lib/ld-linux-armhf.so.3 (0x76fb6000)
libxcb.so.1 => /usr/lib/arm-linux-gnueabihf/libxcb.so.1 (0x76c99000)
libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0x76c86000)
libXtst.so.6 => /usr/lib/arm-linux-gnueabihf/libXtst.so.6 (0x76c71000)
libfontconfig.so.1 => /usr/lib/arm-linux-gnueabihf/libfontconfig.so.1 (0x76c2f000)
libfreetype.so.6 => /usr/lib/arm-linux-gnueabihf/libfreetype.so.6 (0x76b97000)
libgcc_s.so.1 => /lib/arm-linux-gnueabihf/libgcc_s.so.1 (0x76b6a000)
libz.so.1 => /lib/arm-linux-gnueabihf/libz.so.1 (0x76b43000)
libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0x76ac8000)
libXau.so.6 => /usr/lib/arm-linux-gnueabihf/libXau.so.6 (0x76abd000)
libXdmcp.so.6 => /usr/lib/arm-linux-gnueabihf/libXdmcp.so.6 (0x76ab0000)
libXext.so.6 => /usr/lib/arm-linux-gnueabihf/libXext.so.6 (0x76a91000)
libXi.so.6 => /usr/lib/arm-linux-gnueabihf/libXi.so.6 (0x76a73000)
libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0x76a4b000)I have Volumio 2.587 running on an official touchscreen. I followed the instructions and have the keyboard working. I only did the keyboard piece. I don’t care about screen dimming, etc. I am experiencing some strange behavior. The keyboard works perfect the first time after a reboot. The next time it’ll pop up for a split second and then disappear. Also, the settings ( gear) starts going haywire and flashes like a strobe. Once it gets into this state I have to pull the plug to force a reboot.
The keyboard functions great that first use then things start getting wonky.
Thanks,
Martin
Just want to share a simple keyboard layout for swedish users.
Iadded shift and some letters and signs.
<?xml version="1.0" encoding="UTF-8"?>
<keyboard>
<layout id="simple sve keyboard">
<row>
<key>
<default display="1"/>
</key>
<key>
<default display="2"/>
</key>
<key>
<default display="3"/>
</key>
<key>
<default display="4"/>
</key>
<key>
<default display="5"/>
</key>
<key>
<default display="6"/>
</key>
<key>
<default display="7"/>
</key>
<key>
<default display="8"/>
</key>
<key>
<default display="9"/>
</key>
<key>
<default display="0"/>
</key>
<key fill="true">
<default display="⌫" action="backspace"/>
<!-- <default display="Bksp" action="backspace"/> -->
</key>
</row>
<row>
<key obey-caps='true'>
<default display="q" />
<shifted display="Q" />
</key>
<key obey-caps='true'>
<default display="w" />
<shifted display="W" />
</key>
<key obey-caps='true'>
<default display="e" />
<shifted display="E" />
</key>
<key obey-caps='true'>
<default display="r" />
<shifted display="R" />
</key>
<key obey-caps='true'>
<default display="t" />
<shifted display="T" />
</key>
<key obey-caps='true'>
<default display="y" />
<shifted display="Y" />
</key>
<key obey-caps='true'>
<default display="u" />
<shifted display="U" />
</key>
<key obey-caps='true'>
<default display="i" />
<shifted display="I" />
</key>
<key obey-caps='true'>
<default display="o" />
<shifted display="O" />
</key>
<key obey-caps='true'>
<default display="p" />
<shifted display="P" />
</key>
<key obey-caps='true'>
<default display="å" />
<shifted display="Å" />
</key>
<key fill="true">
<default display="⏎" action="return"/>
</key>
</row>
<row>
<key obey-caps='true'>
<default display="a" />
<shifted display="A" />
</key>
<key obey-caps='true'>
<default display="s" />
<shifted display="S" />
</key>
<key obey-caps='true'>
<default display="d" />
<shifted display="D" />
</key>
<key obey-caps='true'>
<default display="f" />
<shifted display="F" />
</key>
<key obey-caps='true'>
<default display="g" />
<shifted display="G" />
</key>
<key obey-caps='true'>
<default display="h" />
<shifted display="H" />
</key>
<key obey-caps='true'>
<default display="j" />
<shifted display="J" />
</key>
<key obey-caps='true'>
<default display="k" />
<shifted display="K" />
</key>
<key obey-caps='true'>
<default display="l" />
<shifted display="L" />
</key>
<key obey-caps='true'>
<default display="ä" />
<shifted display="Ä" />
</key>
<key obey-caps='true'>
<default display="ö" />
<shifted display="Ö" />
</key>
<key fill="true">
<default display="Shift" action="modifier:shift"/>
</key>
</row>
<row>
<key obey-caps='true'>
<default display="z" />
<shifted display="Z" />
</key>
<key obey-caps='true'>
<default display="x" />
<shifted display="X" />
</key>
<key obey-caps='true'>
<default display="c" />
<shifted display="C" />
</key>
<key obey-caps='true'>
<default display="v" />
<shifted display="V" />
</key>
<key obey-caps='true'>
<default display="b" />
<shifted display="B" />
</key>
<key obey-caps='true'>
<default display="n" />
<shifted display="N" />
</key>
<key obey-caps='true'>
<default display="m" />
<shifted display="M" />
</key>
<key fill="true">
<default display="Space" action="space" />
</key>
<key>
<default display="@" />
</key>
<key>
<default display="=" />
</key>
<key>
<default display="."/>
</key>
</row>
</layout>
</keyboard>Use it if you need
regards C
Hello
Is it possible to set a button in the latest Voumio, through which it will be possible to adjust the brightness or turn off the touch screen? Cause I tried to install from the tutorial above but it doesn’t work anymore 
I need this feature a lot. Thank you.
The error appears at the command: sudo pip install rpi_backlight