2.598 (26-07-2019) breaking on Raspi 1

Here you can find all important communications from Volumio's staff

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.

2.598 (26-07-2019) breaking on Raspi 1

Postby jonas18z » Thu Aug 01 2019 11:51

Can I downgrade from terminal och do I need to reflash my card with a older version?
User avatar
jonas18z
Serious Listener
Serious Listener
 
Posts: 68
Joined: Tue Oct 07 2014 18:08

Ads helps Volumio remain Free and Open Source. Please consider donating to help us continue to serve you.


2.598 (26-07-2019) breaking on Raspi 1

Postby DarrenHill » Thu Aug 01 2019 19:36

gkkpch wrote:@sonoskiller: thanks (your were faster), hope we really nailed the issue...


It just took out my Pi Zero too via menu update.

I'll roll back to 2.586 for now until it's fixed.

Editted to add - back up and running again, and (presumably) thanks to the newish account set-up, even set itself up once reconnected.
User avatar
DarrenHill
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Tue Feb 14 2017 13:37


Re: 2.598 (26-07-2019) breaking on Raspi 1

Postby fr01u » Fri Aug 09 2019 08:07

After installing version 2.599, volumio works again fine on my Pi Zero :-)
Random avatar
fr01u
Fresh off the boat
Fresh off the boat
 
Posts: 2
Joined: Mon Jul 29 2019 16:20


Re: 2.598 (26-07-2019) breaking on Raspi 1

Postby sthones » Wed Aug 14 2019 12:31

I can confirm 2.599 working ok on Raspberry Pi Model B Rev 2 (000d).
thanks for the fix.
Random avatar
sthones
Fresh off the boat
Fresh off the boat
 
Posts: 4
Joined: Fri May 17 2019 11:38


2.598 (26-07-2019) breaking on Raspi 1

Postby jcyr » Sat Aug 17 2019 01:43

Many things broken in the latest release (2.599) related to updated plugins on RPi3+. Radio Paradise plugin works but floods the Volumio log with error messages when streaming FLAC. Installing and enabling the GPIO control plugin (using GPIO18) kills the audio output. Installing the Amplifier switch plugin results in a second entry in the installed plugin list with a second entry with the unrelated Radio Paradise entry... what?

All in all, updating Volumio and plugins was a disaster. Tried a fresh install, same issues. This all stuff that have previously worked flawlessly.

Is it possible to revert to whatever was current Volumio and plugins from a few months back?
Random avatar
jcyr
Fresh off the boat
Fresh off the boat
 
Posts: 8
Joined: Sun Aug 11 2019 19:20


2.598 (26-07-2019) breaking on Raspi 1

Postby DarrenHill » Sat Sep 07 2019 08:43

I'm getting crashes again on 2.599 on my Pi ZeroW.

Reboot and it will run for a while (anything between a few minutes and several hours) and then just completely stop responding (no ping, no connection). This is both when it's just sat idle and when it's playing an internet radio stream.

Will roll back to 2.586 for a while to test the SD card out, and see how it goes.
User avatar
DarrenHill
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Tue Feb 14 2017 13:37


2.598 (26-07-2019) breaking on Raspi 1

Postby Fressor » Fri Sep 27 2019 19:37

Hello,

I've got a Raspi 1 and exactly the same problems. Newest version of Volumio booting up without problems, then I configure it, register my >50k titles lan-library and let it index it. Lasts a long long time, approx. 10 hours or more. Afterwards, if I ever reboot the device, it won't come up again, hangs at some obscure point, won't be reachable neither via webgui nor via ssh, "connection refused". It's registered correctly in my LAN, the router displays the correct IP. Only thing that helps at this moment is to reflash the card.
Did this several times, nothing changed, so I reverted to 2.586 as suggested here, and it's back to normal! Working flawlessly. Indexes the whole library in less than an hour, no problems with rebooting, menus much faster etc.

Conclusion: Versions after 2.586 are incompatible with Raspi 1. Don't update.
Random avatar
Fressor
Fresh off the boat
Fresh off the boat
 
Posts: 9
Joined: Wed Feb 04 2015 13:33


Re: 2.598 (26-07-2019) breaking on Raspi 1

Postby DarrenHill » Sat Sep 28 2019 08:48

To report back, 2.586 has been rock solid since I rolled back.

So my conclusion is also that there's something unstable on 2.599 with the single core/old Pi's.

I see now 2.619 is out so will take it up to that and see how that one goes for stability. But keeping the img file for reliable old 2.586 around just in case...
User avatar
DarrenHill
Sunday DIYer
Sunday DIYer
 
Posts: 13
Joined: Tue Feb 14 2017 13:37


Re: 2.598 (26-07-2019) breaking on Raspi 1

Postby Fressor » Mon Sep 30 2019 06:05

Hi Darren,

I already tried 2.619, it had the same problem.
Random avatar
Fressor
Fresh off the boat
Fresh off the boat
 
Posts: 9
Joined: Wed Feb 04 2015 13:33


Re: 2.598 (26-07-2019) breaking on Raspi 1

Postby michelangelo » Mon Sep 30 2019 10:45

This is due to the new kernel for PI4.
We are building a new image with updated kernel
User avatar
michelangelo
Founder
 
Posts: 4422
Joined: Sun Dec 15 2013 23:18

PreviousNext

Return to Staff comunications

Who is online

Users browsing this forum: No registered users and 1 guest